Guide: Configuring Motion Detection on a Hikvision NVR or DVR

Step 1: Configure Motion Detection on the NVR or DVR

  1. Log in to Your NVR or DVR

    • Access the interface either directly through a connected monitor or via a web browser.
  2. Enable Motion Detection

    • Navigate to Configuration > Event > Basic Event > Motion Detection.
    • Select the channels you want to monitor and enable Motion Detection.
  3. Set the Detection Area and Sensitivity

    • Define the detection area by selecting regions of interest in the camera view.
    • Adjust the sensitivity level to minimise false alarms and tailor detection to your environment.
  4. Enable Notifications

    • Under Linkage Action, tick the box for Notify Surveillance Center to ensure notifications are sent to the Hik-Connect app.

Step 2: Enable Notifications on the Hik-Connect App

2.1 Activate Notifications in the App

  1. Open the Hik-Connect app on your mobile device.
  2. Navigate to the Device Settings for your connected NVR or DVR.
  3. Enable Alarm Notifications for the channels you configured for motion detection.

2.2 Adjust Mobile Notification Settings

  1. Ensure notifications are enabled for the Hik-Connect app on your mobile device:
    • iOS: Go to Settings > Notifications > Hik-Connect, and toggle on Allow Notifications.
    • Android: Go to Settings > Apps > Hik-Connect > Notifications, and ensure all notification options are enabled.
  2. Customise your notification preferences, such as sound, vibration, or pop-up alerts.

2.3 Test Notifications

  1. Trigger a motion event by moving within the camera’s monitored field of view.
  2. Verify that you receive a notification on your mobile device.

Troubleshooting Tips

  • No Notifications Received:

    • Ensure your NVR or DVR is connected to the internet.
    • Double-check that motion detection is enabled and configured correctly on the desired channels.
    • Verify that Notify Surveillance Center is enabled in the Linkage Action settings.
  • Frequent False Alarms:

    • Refine the detection area to avoid high-traffic zones, such as areas with moving foliage or pets.
    • Adjust the sensitivity to reduce unnecessary triggers.

By following this guide, you can effectively enable motion detection on your Hikvision NVR or DVR and receive timely alerts on your mobile device for enhanced security monitoring.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.