Guide: Changing HDMI Output Settings on a Hikvision NVR or DVR via IP Address or SADP
Share
This guide explains how to adjust the HDMI output settings on your Hikvision NVR or DVR by accessing the device via its IP address or using the SADP Tool if necessary.
Step 1: Identify the Device's IP Address
-
Using SADP Tool (Optional):
- Download and install the Hikvision SADP Tool on your computer.
- Launch the tool, and it will automatically detect all Hikvision devices on the network.
- Locate your NVR/DVR in the device list and note its IP address.
-
Using the Local Interface:
- If you can access the NVR/DVR locally, log in and navigate to Configuration > Network Settings to find its IP address.
Step 2: Access the Device via a Web Browser
-
Connect to the Same Network:
- Ensure your computer is on the same local network as the NVR/DVR.
-
Open a Web Browser:
- Enter the IP address of your NVR/DVR into the browser’s address bar (e.g.,
http://192.168.1.100
).
- Enter the IP address of your NVR/DVR into the browser’s address bar (e.g.,
-
Log In:
- Enter your admin username and password to access the device’s interface.
Step 3: Navigate to HDMI Output Settings
-
Open the Display Settings:
- After logging in, go to Configuration > System > Display (or Configuration > Video Output or Configuration and then System settings then menu output depending on your firmware version).
-
Adjust HDMI Output Settings:
-
Resolution:
Select the appropriate resolution for your monitor or TV (e.g., 1920x1080@60Hz for Full HD or 3840x2160@30Hz for 4K). - Start from the Lowest resolution.
-
Resolution:
-
Save Changes:
- Click Apply or Save to confirm the new settings.
Step 4: Test and Verify the HDMI Output
-
Connect and Check the Monitor:
- Reconnect the monitor to the NVR/DVR’s HDMI port and check the display.
- Ensure the resolution matches the selected settings and that the live view layout displays correctly.
-
Troubleshooting:
- If the screen is blank or distorted, try a lower resolution or use a different monitor to test compatibility.
Troubleshooting Using SADP
If you cannot access the NVR/DVR through the web browser:
-
Open SADP Tool:
- Launch SADP and select your NVR/DVR from the device list.
-
Access the Web Interface:
- Click Open Device via Browser to open the login page in your default browser.
-
Modify Network Settings (if needed):
- If the IP address is inaccessible, use SADP to change the device’s network settings (e.g., set it to the same subnet as your computer).
Additional Troubleshooting Tips
-
Blank Display:
- Ensure the monitor and HDMI cable are functioning correctly.
- Select a compatible resolution via the web interface or local menu.
-
Cannot Access via IP Address:
- Check network connections and ensure the NVR/DVR is powered on.
- Use the SADP Tool to reset or assign a valid IP address.
By following this guide, you can adjust and optimise HDMI output settings on your Hikvision NVR or DVR, ensuring compatibility with your monitor and enhancing your viewing experience.